CNC Machining Service China Company

2018年10月30日星期二

How To Use Automatic Screw Locking Machine In Right Way

Automation is a process that has taken place in several companies dedicated to the fields of electronic and electrical devices, electronic toys, mobile phones assembly lines. Most of the companies that go to the fully automatized process need to have diverse devices such as automatic screw feeders, screw locking devices, and soldering machines. Many of these companies need certain parts to be lock and solder one to another and they have to be well-adjusted and well-wield in order to provide a great performance and a well-done final product as well.

Additionally, those three devices have to be well selected and a good research has to be done in order to obtain the best automatic machines from the market. And, also, in an automation production process, the three of them complemented each other and they take part in the high quality feature needed to be achieved.

To Furthermore, the usage of any automatic machine has to compile with some or all of the following features:

The method to program these devices has to be very simple.
The accuracy of the screw position, the adjusting of the screws and, for the soldering machine, the position of the welding and the moving tips repeatability has to be one of the aspects to be achieved in order to get a well-done product.
The devices should support all the requirements demanded by customers according to the factory production process. Process parameters have to be adjusted by the customer to use it in different difficult operations and tasks.
The devices have to be provided with a secure environment and a reliable working system avoiding any difficult situation in the future.
The automatic soldering machine has to be able to heat and cool rapidly.
The devices have to provide a high resistance to demanding working continuous time.
All of the automatic devices have to be designed to provide a long service life.
The design of the machines have to be in compliance of the customers’ requirements
The devices have to be molded in aluminum with a solid, beautiful, and high precision structure in order to achieve the best performance ever.

It is important to have in mind that all of these machines have to be placed in the right position along the assembly line to achieve a better performance and an increase of the production.

According to the position of the screw feeder, the automatic screw locking machine has to be placed logically after it and then the soldering machine has to come to finish with the production line assembly. Remember that these devices complemented each other and they have to be placed in the right order, so the manufacturing process will be achieved successfully and thus the final product will be a satisfactory one to benefit both the company and the client as well.

In conclusion, there has to be a well-done research for the selection of any automatic device that can be done through Internet, other field-related companies and surveys among previous or potential customers.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Contact:
Person: James Yuan
Company: Huizhou Shengyang Industrial Co., Ltd
Add: 5th Floor,D Building,Jintaiyang Industrial Zone,Xingye Road,Zhongkai District,Huizhou,Guangdong,China
Tel: 86-752-6682869
Mobile:+86-13352636504
Email: info@automaticchina.com
Site: https://www.automaticchina.com

Article Original From:https://www.automaticchina.com/how-to-use-automatic-screw-locking-machine-in-right-way/

2018年10月29日星期一

Choose Right Automatic Screw Feeders Machine Suppliers For Your Special Demands

One of the companies dedicated to the automation of several businesses is Huizhou Shengyang Industrial Co., Ltd. This China-based industry has provided a lot of Automatic Screw Locking Machine and all sort of devices related to it. The company is formed with a group of dedicated professionals and it has provided great satisfaction to major end users and systems integrators.

The service provided by the company is oriented in achieving the highest performance standards in and important assembly line for any company which wants to move to the partial or fully automated company.

Among the products provided by the company, these Automatic Screw Feeders are one of its top manufactured items which have an increasing demand day after day.

Among the most important characteristics that these devices have, you can find:

Screw feed devices are designed for those who need a hand-held machine or simply want to go to the fully operating assembly line. The final product is going to comply with the needs expressed by the clients.
A tough polymer is used to coat the vibrators bowls with the main purpose of providing a long life and secure protection for workers and operators.
The design of the device made of steel is made in order to sound deadening enclosures.
The material which composed the escapements and tracks are made of hardened and ground tool steel.
The controls are packaged as a “plug-in” module, thus the maintenance is an easy one to perform.
It is provided with support air, electric tools, or torque reaction arms; depending on what the client is looking for.

The variety of Automatic Screw Feeders can be observed in the long line of products manufactured by Assembly Automation. Among them, there are feeders for large bolts and screws, pins, and small screws.

The components of the devices are varied, so the options are limitless for future and habitual customers. According to the needs expressed by clients, the devices can come with one or many of the following elements:

Operation can be performed vertical, horizontal, or inverted.
The devices can be single or multi-spindle
There is the choice to integrate most brands of pneumatic or DC electric tools to satisfy the clients’ demands.
Products can also work using vacuum for it functioning.
The tool support arms are positioning in a way that tool support can be performed or they are based for screw feed systems.

The Automatic Screw Feeders can be accompanied by a series of accessories, such as:

Hopper systems of several sizes – 0.25, 0.8, and 2.0 cu/ft. Each of them comes with a bowl level sensor, controller, and a swing-away base.
Sensors that can presence screws in the system.
Sensors to determine the depth of the joints where screws are going to be placed.
Limit switches
Several programmable multi-feed devices can be part of the companions in the acquisition of any screw feeder.
Offsets are other of the accessories provided by the company if the client requires it.

Therefore, if you are looking for a trustable provider in automatic devices, such as the automatic screw feeders, you can give a chance to Assembly Automation as many of the finest companies in the world have given to it.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article Original From:https://www.automaticchina.com/choose-right-automatic-screw-feeders-machine-for-your-special-demands/

2018年10月25日星期四

Handles Type Locking Bits With Screw Feeding System For Semi-Automatic Electrical Screw Assembly Line

The Automatic Screw Locking Machine presented by Huizhou Shengyang Industrial Co., Ltd. is marked principally by the following features:

The screwdrivers are small so the workers operating vision is not going to be blocked.
The screwdrivers are not heavy at all, providing a comfortable sensation while working.
The noise made by this device is lower than 50 decibel.
There is no need to use a vibration plate, so the screw will not wear off.
The machine weighs only 9 kg which makes its transportation an easy task to perform.
It possesses intelligent alarm function, featuring acousto-optic reminders.
The machine is provided with a counting function which can be very helpful at the moment of saving the statics for production.
With an ergonomic handle design, the slippery of the screwdrivers is prevented and it also provides good tactility.
It is pretty convenient since the screw can make when a hand help stay lock products, thus a small positioning fixture can be saved here.
As it eliminates the usage of hands at the moment of screwing, the device provides a quick service. No waiting time since the screw is on the screwdriver placing the screws right on the holes position and lock them securely and tight.
It also provides a clean working area since hands are out of the process. Thus, the product will not rust as other devices with the same function that are in contact with human hands.
The machine has a dimension of 360*250*195mm with a working pressure of 4 ~ 6kg/cm2, and it is suitable for a varied range of production requirements.
The device’s screwdrivers can lock M1-M4 screws by simply changing the feed screw module.
Placing the machine on the production line is an easy task due to its desktop type.
It is made of a high-rigidity aluminum alloy with a multi-axis design that guarantees reliability and accuracy.
Another characteristic featured in the machine is the user-friendly touch screen or teaching pendant operation. It is a very easy to operate machinery.
The crew locking function can be performed without a teach pendant connection.

If any of these features are not convincing enough to buy this Automatic Screw Locking Machine from Huizhou Shengyang Industrial Co., Ltd; perhaps the fact that this company has been providing and manufacturing electronic equipment as well as researching and develop technology linked to factory automatization for more than 23 years will give a good foundation to trust in this company’s products. Furthermore, the company is the primary provider of this sort of machinery in 68 countries around the world with offices in 10 important locations on the planet. One more reason to take into consideration is the fast response the company’s team provides as soon as a requirement is made by any customer.

So if you are interested in acquiring one of these Chinese manufactured products go to the company’s website by clicking hereand check this and other products the manufacturing company is offering to established and possible customers.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article Original From:https://www.automaticchina.com/handles-type-locking-bits-with-screw-feeding-system-for-semi-automatic-electrical-screw-assembly-line/

2018年10月19日星期五

Using Automatic Ultrasonic Welding Machine HVAC jobs as a Repair Method

On HVAC jobs, the big payday is when you get to replace an entire system. There are lots of simple fixes –some temporary and some permanent –that can be used to save customers a whole lot of money. One of these is the use of Automatic Welding Machine.

HVAC techs learn a lot about soldering; one of the first things is that copper pipe cannot be soldered with water still in the pipe. The pipe needs to be drained, closed and dried before any repairs can start. Sometimes this causes problems because if there are multiple leaks in a water cooling system, water may continue to flow down as you attempt to repair the pipe.

Fortunately, there are some ways you can solve this situation. One of them is called the bread trick. Stuff some white bread without the crust into the pipe just above the area you need to solder. This will only work for very slow leaks. It is effective because the bread will swell as it absorbs water, and will dissolve once water pressure is restored. However, You may need to take out the strainers along the system.

The use of pipe freezing machines is a more technical method which HVAC workers use. This method freezes the pipe and its contents so that it can be cut. This is a much more expensive method and it requires the use of highly specific equipment. However, It works perfectly, unlike the bread method. Be careful that you only freeze the area you need to work on. Freezing the entire pipe may cause it to burst.

Denver air conditioning technicians utilize a different technology known as brazing when working on pipes that contain coolant. Brazing makes use of oxyacetylene for refrigeration. Use silver soldering instead of lead. Copper binds chemically with Silver to produce a leak free joint. Oxyacetylene torches are used for heating the entire pipe up to temperatures above 5000 degrees Fahrenheit. Of course, This means you need to make use of the proper safety equipment required for these sorts of torches such as a welding mask to save your eyesight.

You need to clean the pipe to properly braze. It should be solid once it sets. The outer and inner joints need flux to be applied before heat. The torch should not be used to heat the solder. Rather, heat the pipe evenly so that the solder makes a uniform fit. For a tight fit, use just enough solder. Too much solder could break up and foul up equipment. As a final step, perform a pressure test. Apply soap to the exterior of the pipe and observe for bubbles which indicate an improper seal. Any drop indicates a leak once pressure is applied.

An alternative to welding is the use of screws by means of automatic screw locking machine with automatic screw feeder.

Without a doubt, a Weller soldering station is one of the machines most favored for soldering the joins which exist in between electronic components of an electrical piece of equipment or for the welding of two wire cables in your electronic handiwork.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article From:https://www.automaticchina.com/using-automatic-ultrasonic-welding-machine-hvac-jobs-as-a-repair-method/

2018年7月4日星期三

DIFFERENCES BETWEEN DOUBLE COLOR MOLD AND OVERMOLD

Double color mold: two kinds of plastic materials are molded on the same injection molding machine, and are molded in two times, but the products only die once. Generally, this molding process is also called double injection molding, usually by a set of molds, and a special two-color injection molding machine is needed.

Overmold: two kinds of plastic materials do not have to be injected into the same injection machine and are molded in two times. After taking out the mold from a set of moulds, the product is then placed in another set of moulds for second injection molding. Therefore, the general molding process is usually done by two sets of molds instead of a special two-color injection molding machine.

Double color mold and overmold overview: the design should pay attention to the positioning of overmold, need to make the adhesive sealing and the reverse slope on the rubber parts to prevent the deformation of the glue. Double color mold is becoming more and more popular in the market at present. This process can make the appearance of the product more beautiful, easy to change color but can not be sprayed, but the cost is expensive, also needs high technical requirements.

The two shapes of Cavity are different, forming one kind of products respectively. And the two shapes of the Core are exactly the same.
the front and rear mould of the die must be 180degree after the center rotates. This check action must be done at design time.
pay attention to the position of the pinhole of the top, the minimum distance 210mm. Large mold must be properly increased the number of rod holes. Moreover, because the thimble attached to the injection molding machine is not long enough, we must design an elongated thimble in the mold, and the thimble will grow about 150mm of the mold base. 2 positioning rings must be designed on the back die floor.
the total thickness of the front panel plus A board should not be less than 170mm. Please take a closer look at other reference data of this type of injection molding machine, for example, the maximum thickness of the injection mold, the minimum thickness of the mold, the distance between the top hole and so on.
the water outlet of the three plate die is preferably designed to be automatically demoulding. Special attention should be paid to whether the ejection action of the soft rubber nozzle can be *. 6. the depth of the SPRUE in the front side does not exceed 65mm. The distance from the top of the upper side (SPRUE) to the center of the mold is not less than 150mm.
in designing second injection moulded CAVITY, we can design a part of avoiding the first place of the product that has been molded by CAVITY. However, it is necessary to carefully consider the strength of each sealing site, that is, in the injection molding, will there be a plastic deformation under the large injection pressure, which may lead to the possibility of a batch front in the second injection molding.

in designing second injection moulded CAVITY, we can design a part of avoiding the first place of the product that has been molded by CAVITY. However, it is necessary to carefully consider the strength of each sealing site, that is, in the injection molding, will there be a plastic deformation under the large injection pressure, which may lead to the possibility of a batch front in the second injection molding.
injection molding, the first injection molding product size can be slightly larger in order to make it in the second molding can be more tight with the other CAVITY, in order to meet the sealing effect.
pay attention to whether the flow of plastic will be impulsive in the second injection process, so that the first molded product will deform its glue position. If this is possible, we must try to improve it.
before A or B plate clamping, pay attention to whether the front mold Slider or Lifter will first reset and crush the product. In this way, we must try to make the A and B boards die first, then the SLIDER or LIFET of the front die can be reset.
two CAVITY and CORE water distribution as far as possible, and balanced, the same.

12.99% situarion is to first inject the hard rubber part of the product, and then injection the soft rubber part of the product. Because the soft glue is easy to deform.

About JasonMould Industrial Company Limited:

JasonMould Industrial Company Limited is a leading plastic injection molding manufacturer in China. The company had established in the year 2010. The company has made a reputation of being one of the finest plastic mold producers in China. They are great at making medical equipment, appliances, electronic equipment and even safety equipment.

For more about custom manufacturer of plastic molding products,please visit https://www.jasonmolding.com/

Inquiry Contact:

Contact person: James Yuan

Company name: JasonMould Industrial Company Limited

Address: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China

Telephone: 86-752-6682869

Email: info@jasonmolding.com

Website: https://www.jasonmolding.com/plastic-injection-molding/

Article Original From:https://www.jasonmolding.com/differences-between-double-color-mold-and-overmold/

5 WAYS TO PERFECT YOUR PLASTICS DESIGN AND ENGINEERING

When you begin a plastics design and engineering project, the goal is to create and manufacture a quality injection molded component. To accomplish that, you’ll want to consider front-ending some essential parts of the designing and engineering process so the actual plastic injection molding manufacturing process will operate smoothly. This will ultimately save you time and money in the long run.

Select The Right Material

This may be the most straightforward rule of the previous four. Determine what material is right for your part. Is this a medical part? An automotive part? What are the requirements? Does it need to be flexible or rigid? Does the part need to withstand extreme cold or hot temperature? What material do other similar parts use? These questions are just the beginning. Thoroughly research which material works the best for the specific part you’re looking to produce.

Make Sure The Wall Thickness Is Uniform

Making sure that the wall thickness of your part are as uniform as possible to avoid warpage, sink marks, voids, flow restrictions and longer, uneven cooling times. If uneven wall thickness is essential to the part, try to strive for smooth transitions that gradually taper.

Try To Avoid Undercuts

Undercuts make it difficult to de-mold your part. The undercut piece of plastic will get lodged inside the mold once the part has hardened and cooled, making it difficult to eject the part from the mold. When undercuts are necessary to the part, and not a byproduct, many manufacturers have lifting mechanisms and side actions to help de-mold the part.

Try To Avoid Sharp Corners

Try to avoid designing and engineering a part with sharp, squared edges. Sharp edges, like 90-degree angles, produce parts with molded-in stresses. The results are weak points within the part, which leads to cracking and/or part failure. If your part must have a sharp corner, adding a radius or several radiuses will reduce the higher levels of molded-in stress. The radius will redistribute the stress and allow the material to flow more evenly, thus avoiding breakage or failure.

Make Sure To Consider Warpage And Shrinkage

Materials cool and shrink differently when your injection molded part cools. Warpage and shrinkage are both kinds of distortion that can happen during the cooling process. Warpage distorts the dimensions and is often caused by excess stress on the part itself. Shrinkage occurs when there’s a difference between the linear dimension of the molded part and the mold itself. In order to prevent one or the other, pay close attention to the tooling, part geometry and processing of the part.

About JasonMould Industrial Company Limited:

JasonMould is one of the best plastic injection molding manufacturer that offer great services to their clients when it comes to manufacturing advanced molding tools. They export their tools to different parts of the world and have become one of the most famous names in the industrial sector.

Inquiry Contact:

Contact person: James Yuan

Company name: JasonMould Industrial Company Limited

Address: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China

Telephone: 86-752-6682869

Email: info@jasonmolding.com

Website: https://www.jasonmolding.com

Article Original From:https://www.jasonmolding.com/5-ways-to-perfect-your-plastics-design-and-engineering/

2018年7月1日星期日

CHARACTERISTICS OF NUMERICAL CONTROL SPECIAL MACHINING TECHNOLOGY

With the rapid development of digital technology and numerical control machine tool technology, different types and different types of CNC machine tools have been introduced into the mold manufacturing industry. The processing requirements for the space surface and difficult processing materials in the traditional manual die processing methods have been solved, and the use scope of the processing materials has also been expanded in the same time. . In recent years, through the extensive application of NC special CNC machining technology, it can be found that it has the following characteristics:

1.NC special machining technology can perfectly process all kinds of materials with high hardness, soft texture and high melting point, and will not be controlled by any external forces. At the same time, no manual intervention is needed in the processing process, and the accuracy of the machining can be corrected and compensated by using the relevant software.

2. When machining parts that need high accuracy machining, CNC machine tools can use their better flexibility to solve the problem of diversity effectively. Therefore, NC special machining technology has no limitations on the strength of processed materials. He can even process parts of various materials.

3. For a very small hole in the part or a little slit, the NC special processing technology can also get very accurate numerical value, process it with very high precision, and the precise machining characteristics of the NC special machining technology can effectively improve the production efficiency, and the parts are very complex for some processing. Parts, production efficiency increased more, can reach ten times, or even higher.

4. Some CNC machine tools can be used in one machine, because they have a lot of replacement devices and can be replaced at any time. This can not only save the cost of the machine, improve the efficiency, increase the profit, but also save the area of the area to reduce the rent. Thermal stress, the remaining thermal stress can be cooled to make hardening and so on, and the size difference of each part can almost remain stable.

About JasonMould Industrial Company Limited:

For more about custom manufacturer of plastic molding products,please visit https://www.jasonmolding.com/

Inquiry Contact:

Contact person: James Yuan

Company name: JasonMould Industrial Company Limited

Address: LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China

Telephone: 86-752-6682869

Email: info@jasonmolding.com

Website: https://www.jasonmolding.com

Article Original From:https://www.jasonmolding.com/characteristics-of-numerical-control-special-machining-technology/

订阅：博文 (Atom)