FOUR OPERATIONS OF INJECTION MOLDING PROCESS

JasonMould Industrial Company Limited is a professional china plastic injection molding company for 3D Printing Rapid Prototyping Service, precision CNC milling service and custom CNC machining services, custom plastic injection molding or moulding company with mould and dies development and manufacturing.

Today we will tell you the knowledge about injection molding process.

The injection machine takes plastic granules- raw material, heats them until molten, and then injects molten plastic material into the mold. The barrel in injector contains a screw or auger. The heater bands around the outside raise the temperature to melt the plastic to the desired level. The plastic injection molding process usually produces large numbers of workpieces of high quality at high efficiency.

Injector basically is a machine for raising plastic temperature to a point where it will flow under pressure, for allowing the plastic to cavity and solidify in the mold, which the machine keeps closed, and for opening the mold to eject the solid plastic workpiece.

The plastic injection molding process is as follow:

1. Raising the temperature of the plastic into a viscous flow state where it will flow under pressure. This is done in the barrel of injector both by heating and by grinding down the solid granular to form a uniform viscosity or melted at an elevated temperature. The inside of barrel is equipped with reciprocating screw or a ram. This operation of the process us referred to as the plasticizing of the material.
2. Conveying the molten plastic material into the cavity of mold. The liquid or molten plastic from the barrel of injector is transferred or forced through various flow channels or runners into the cavities of the mold, and to be formed into the desired workpiece.
3. Cooling and solidifying the molten plastic in the mold. The mold will keep closed, which is to solidify the plastic and freeze it permanently into the shaped desired for thermoplastics. To thermoset plastic material, the third operation is to keep on heating the mold so that the plastic reacts with cross-linkage to form the workpiece.
4. Open the mold and eject the workpiece from the mold.

Plastic material in the form of granules is melted until soft enough to be injected under pressure to fill a mold. The result is that the shape is exactly copied. Once the plastic molding has cooled sufficiently to harden the mold opens releasing the workpiece. The whole injection molding process then repeats.

About JasonMould Industrial Company Limited

Jasonmould is a manufacturer of plastic molds- injection mold, die casting moulds, plastic blow molding, rotational molding, medical plastic injection molding, two shot plastic injection molding, insert molding, overmolding, metal injection molding, micro injection molding, powder injection molding, ceramic injection molding, liquid injection molding, husky injection molding, household mold, casting mold, die mold tool, custom molds, china moulds, rapid prototyping tooling, plastic prototyping tooling, punch press tooling, die and tooling for mobile/ cell phone parts, automotive parts, vacuum cleaners, rechargeable tools, telephones, copiers, computers, multimedia speakers, and many other electronic products and household appliances. And also a plastic product manufacturer- plastic parts, plastic water tank, plastic balls, plastic containers, plastic buckle, plastic anchor, plastic hanger, plastic spoon, plastic pipe fitting, plastic tumble, plastic tableware, plastic cups, plastic bottles, plastic tray, plastic cosmetic container, plastic case, plastic food container, plastic chairs, plastic caps, plastic cap closure, plastic tubes, plastic water pipes, plastic knobs, plastic tubing, plastic utility boxes, plastic racks and so on.

Contact:
Person: James Yuan
Company: JasonMould Industrial Company Limited
Add:  LongGang Village,LongXi Town,BoLuo County,HuiZhou City,GuangDong Province, China
Tel: 86-752-6682869
Email: james@jasonmolding.com

Site:https://www.jasonmolding.com/custom-injection-molding/

Article Original From:https://www.jasonmolding.com/four-operations-of-injection-molding-process/